Alexa Controlled Blinds Factory introduces how to install electric curtains reasonably:

1. The accuracy of positioning is the key to the installation of electric curtain rails.

First, the fixed hole distance and the size of the required mounting rail must be measured. It should be noted that the total length of the track is the sum of the motor, track, and auxiliary gearbox.

2. Install the lifting clamp

Rotate the clip 90 degrees to connect with the electric curtain rail, and then use the self-tapping screw to install the lifting clip on the top plate. If it is a concrete structure, it needs to be fixed with expansion screws.

3. Motor and track connection

Place the motor in the main gearbox and rotate it 90 degrees clockwise. The interface between the flat shaft of the main gearbox and the motor should match. After rotating in place, push the insert into the gearbox to the limit position, and it will automatically lock at this time.

4. Adjust the motor program

The rear end of the motor is equipped with a set of gears and micro switch devices. The motor wiring needs to rotate forward and reverse to realize the self-positioning of the curtain opening and closing stroke.